Crochet hook size chart
Pick a hook size in millimeters, US letters or old UK numbers and read off the other two. The full chart, with steel hooks for thread, is underneath.
Convert a hook size
A 5 mm hook is US H/8 and old UK 6.
Every crochet hook size
Millimeters are the hook's real thickness. US letters are not the same from one maker to the next (a G hook is 4 mm from one and 4.25 mm from another), so go by the millimeters.
| Metric (mm) | US | UK (old) |
|---|---|---|
| 2.25 mm | B/1 | 13 |
| 2.5 mm | — | — |
| 2.75 mm | C/2 | 12 |
| 3 mm | — | 11 |
| 3.25 mm | D/3 | 10 |
| 3.5 mm | E/4 | — |
| 3.75 mm | F/5 | 9 |
| 4 mm | G/6 | 8 |
| 4.5 mm | 7 | 7 |
| 5 mm | H/8 | 6 |
| 5.5 mm | I/9 | 5 |
| 6 mm | J/10 | 4 |
| 6.5 mm | K/10.5 | 3 |
| 7 mm | — | 2 |
| 8 mm | L/11 | 0 |
| 9 mm | M/13 | 00 |
| 10 mm | N/15 | 000 |
| 11.5 mm | P/16 | — |
| 15 mm | P/Q | — |
| 15.75 mm | Q | — |
| 19 mm | S | — |
Steel hooks for thread
Steel hooks are for crochet thread and lace. Their numbers run backwards (a higher number is a finer hook) and differ between makers more than any other size, so treat the numbers as a guide and buy by millimeters.
| Metric (mm) | US | UK (old) |
|---|---|---|
| 0.6 mm | Steel 14 | — |
| 0.75 mm | Steel 12 | — |
| 0.85 mm | Steel 10 | — |
| 0.9 mm | Steel 8 | — |
| 1.1 mm | Steel 7 | — |
| 1.4 mm | Steel 6 | — |
| 1.5 mm | Steel 5 | — |
| 1.65 mm | Steel 4 | — |
| 1.8 mm | Steel 3 | — |
| 1.9 mm | Steel 2 | — |
| 2 mm | Steel 1 | 14 |
| 2.1 mm | Steel 0 | — |
How to convert a crochet hook size
A US pattern asks for an H hook, a British one for a 5 mm, and an old leaflet for a No. 6. They are the same hook. The thickness in millimeters is the real size, and the letters and numbers are names for it.
- 1
Find the size the pattern gives
Look in the materials list. US patterns give a letter and number such as H/8, European and current British patterns give millimeters, and older British patterns give a bare number.
- 2
Choose it in the matching list
Pick the size in the Metric, US or UK list. The other two lists move to the same hook and the line underneath says the answer in words.
- 3
Read the millimeters on your own hook
Most hooks have the size in millimeters stamped on the thumb rest. If it has worn off, a hook and needle gauge will tell you: the hook's shaft just fits the right hole.
- 4
Use the steel table for thread
Hooks under about 2.25 mm are steel hooks, numbered backwards. Find them in the second table and go by millimeters, because makers number them differently.
- 5
Swatch before you trust it
The hook in the pattern is the one that gave the designer the gauge. Work a swatch and change hook size until your gauge matches.
Frequently asked questions
- What size is an H crochet hook in mm?
- An H hook, also written H/8, is 5 mm. In old UK sizes it is a 6.
- What is a 4 mm crochet hook in US size?
- A 4 mm hook is a G/6 in most US sets. Some makers stamp G on a 4.25 mm hook, so check the millimeters.
- Why is my G hook 4.25 mm?
- US hook letters were never fully standardized. One maker's G is 4 mm and another's is 4.25 mm, and the same happens at a few other letters. The millimeter size is the one that is the same everywhere.
- Why do steel hook numbers go backwards?
- Steel hooks for thread follow an old wire gauge in which a higher number means a thinner wire, so a steel 14 is finer than a steel 0. The numbers also differ between makers, which is why patterns for thread usually give millimeters.
- Which hook size goes with my yarn?
- As a starting point: fingering 2.25 to 3.5 mm (B/1 to E/4), DK 4.5 to 5.5 mm (7 to I/9), worsted 5.5 to 6.5 mm (I/9 to K/10.5) and bulky 6.5 to 9 mm (K/10.5 to M/13). The yarn weight chart has every weight.
